1731
New information on the website

woodcore

All technologies and materials of the top racing configuration are used in this construction. At the same time, stiffness distribution has been revised and conforms to the purpose and character of each model. Made of phenol composite the sidewalls increase torsional stiffness while Vectran increases and accelerate rebound.
Special W, F, M high in graphite bases are used in this construction. Compared to the usual graphite bases they provide distinctly better slides.

Description of base types >

This construction is available for any model.
Price: 900


Please bear in mind that there is no warranty for the insert blocks of the “Freecarve” snowboard line with titanal construction (Titanal , World Cup & Spirited).

There is no strong strengthening of the insert blocks in the correct titanal design.That is why when your feet work on a hard fastening (catek, bomber) and your feet are large you can easily pull out the insert blocks.

So, if you want to be careful not to pull out the insert blocks you are strongly recommended choosing an option “Additional carbon strengthening of the titanal constructions”. The price for this kind of strengthening is €100 in addition to the price of the board. Then your warranty will cover in full the insert blocks.


SL & GS boards are used together with plates which means that strengthening of the inserts is not necessary: boots are fastened to the plate that lies on the board and evenly distributes all the load.


Stiffness

Each board type has three basic stiffness levels: Soft, Medium and Hard, that cover the entire range from 50 to100 kg. In addition, stiffness of snowboard could be always customized.

Edge bevel angles

The base edge bevel angle is 0° and side edge bevel angle is 2° (88°) for freecarve snowboards.

Base

Special W, F, M bases

Topsheet options

Customary snowboard topsheet is white with OES logo. We propose as an option to change the topsheet to a single color sliding base that will be twice stronger and thicker than the ordinary one. The color range is the following:

The colored sliding base for the topsheet — 50

Below is the photo of the finished topsheet:


It is possible to print your own picture.

Custom design of topsheet — 150.



Besides, we can adapt any graphic design from our library for the model you’ve chosen.

Adapted design from our library — 50.


Colored base — 100



Carbon under transparent topsheet — 100



Carbon instead of the topsheet — 75

We recommend!

We recommend to sharpen the edge of a snowboard from base side to 0,5, 0,75 or 1 degree. You can do it yourself with the help of the device for edge sharpening purchased in a shop or request any ski service.

Home

Our production

Skis

To buy

Warranty

Info

Contacts

Please note!

A snowboard comes to a state of its normal stiffness only after at least 10 hours of active ride.
Compound of resin and materials should become more elastic and flexible.

Premium-class snowboard

As you can see, we offer a very wide variety of ready-​to-​buy model versions: 4 construction types and 3 stiffness degrees, each of which has precisely tailored and tested components.

However, if you need a personal approach, there is a special service…
Detailed description >

Dear customers!

The discounts are made only for the special offers. The terms of the offers are announced on this site. We cannot provide any additional discounts besides those given on the site. Otherwise we had to include them into the starting price. Our company put away this practice in favor of true and not excessive prices.